LEVEL 25 of TowerMaze - the ultimate maze!
Print Profile(4)
Description
Membership
If you like my designs and want to sell physical versions of them consider becoming a member for just 10$ a month! It shows support and let's me to offer more designs! Anyways, enjoy the designs!
Important: SUPER SIZE TowerMaze level 26 currently available for downloading HERE!
Who’s up for more challenges? Well, There’s plenty more to do, I have designed 51 TowerMaze levels in total. However, not all of them are published yet as I am always printing and testing out the designs before uploading them for others. This listing page is for TowerMaze level 25. If you enjoy the designs and want more of them sooner, consider boosting this design as more boosts = I get the next printer quicker = I can test designs a lot quicker = I can upload them sooner rather than later. Either way, the designs are available for free to anyone interested in the challenge.
Added feature: Level 16 to Level 25 has a one-way closing straight closing path to reset the maze!
TowerMaze level 16 to level 25 are the same size with a different maze pattern on the surface, therefore, the case for TowerMaze level 16 will work for all the mazes from level 16 up to level 25 - don’t need to print multiple ones if you want to save on material.
Dimensions and print specifications for TowerMaze level 25:
Dimensions for the maze: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches)
Dimensions for the case: Height = 11.4 cm (4.49 Inches) | Diameter of 5.4 cm (2.13 inches)
Print time for TowerMaze level 25: 2 hours and 1 minutes
Material used for TowerMaze level 25: 16.10 meters / 48 grams
Print time for case for TowerMaze level 25: 2 hours and 16 minutes
Material used for case for TowerMaze level 25: 18.70 meters / 55.80 grams
Printing at the same time:
Total print time for TowerMaze level 25 + case: 3 Hours and 55 minutes
Total material used for TowerMaze level 25 and case: 34.75 meters / 103.65 grams
Print time depends on printer and print settings, the print times above are estimates for model being printed on a Bambu Lab P1P printer with these settings:
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Other Levels Available here:
If you are interested in more levels, consider boosting any of these levels as that enables me to make more designs in a shorter span of time. Thank you for your support
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (147)