Strider&Microtech Stub knife toy挺进者微技术联名款折刀玩具

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

This Custom Stub designed by Anthony Marfione and Mick Strider is one of my favorite knives. I copied it for 3D printing. I hope you like it.
The handle and the back clamp are integrally formed.Just assemble the blade.Please use glue for the main shaft of the knife.
Please be careful when playing with it.

这款由 Anthony Marfione 和 Mick Strider 设计的 Custom Stub是我非常喜欢的刀具，我对其进行了复刻用于3d打印，希望大家喜欢。
刀柄背夹一体成型，只需简单组装刀片，刀的主轴请使用胶水。
把玩时候请注意安全。

PS：2024/6/20

Extrema Ratio Folding Knife Toy极端武力折刀玩具模型https://makerworld.com/zh/models/503259#profileId-418692

Microtech Jagdkommando Knife Toy微技术三棱刺刀军刀模型带鞘玩具https://makerworld.com/zh/models/488465#profileId-401449

M48 Cyclone Push Dagger Toy Knife 三棱手刺刀带鞘玩具

https://makerworld.com/zh/models/499176#profileId-413830

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.