The Original Spiral Bevel Gear Fidget Toy v2
Print Profile(2)
Description
This fidget spinner has no need for any fasteners, but uses 3D printed pins that click into place.
With a few drops of superglue on the tips of the pins everything can also be permanently assembled into place.
Use a little grease to lubricate the shafts which will make the gears spin quite freely after a few turns.
The increased size of the ring should also fit slightly bigger fingers.
The number of teeth on both gears are prime numbers.
So it takes a bit of brain action to figure out how many turns are needed to re-align both white indicators.
Note: as usual, the stereo images are of the cross-eyed type.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)