Iphone 15 Pro Max with Builtin Stand
Print Profile(3)
Description
Membership
Join now and start making sales. You are also supporting my creativity with the membership.
Tired of watching youtube or social networks while holding your phone? Always having to have that phone stand with you all the time? Then look no further because i got your back! Or in this case, your phone's back with all the variations i came up to. From 3D effect spiral, hexagons, the famous “Cheese Grater” Mac, Plain with Apple Logo and more. Just choose the profile you like!
Continuing after my 3D effect phone case that i made for my wife's phone, i present you the next iteration of the same effect for your Iphone 15 Pro Max but with a built in stand. Plus some more variations in my profiles. Pick yours!
(Note: This is printed in PLA. It's hard but it fits. I printed several and keep taking my own phone in and out of them to test and until today i didn't break not even one. I keep receiving bad ratings from people who break the case or just because PLA is hard. I advise you to try another variant in TPU if you don't want this)
Boost Me (for free)
No boost obligation. But thanks if you give me one
Watch your movies, browse tiktok or instagram while your phone is in front of you without having to have another stand around. Just flip your case, pull the stand out and “voilá”…
Works in vertical and horizontal mode!
*As seen in these small clips, the stand should stay in place no matter how you “jiggle” your case. It should click in place when closing the stand. If you don't hear a clicking sound, then it means the stand will flop around. I found that while talking with other people that had printed one in a different material (Silk PLA and CF). PLA is advised because it was what i tested. Also, the profile has it's own settings and touching it can cause failures. Also added pictures of the phone inside the case showing it fits without a problem.
*After print finished: let it cool! Don't try and force it or it can damage the part. After cooled, pry open the stand part carefully until you hear a “snap”. That means that the retaining pins are now loose and you can open the stand as normal. Remember, let it cool!!!
**Important note regarding choosing the profile and sending it to the printer through the Handy App. There must be a bug and any profile you choose, will print always the 3D circular one. Thank you for the user that commented on that.
*Please don't change any settings other than colors. All the cases back are designed to be sliced with those effects. If you want a plain case, you have one here or you can print one from other creators.
*Wireless charging works too! Magsafe not possible due to the stand!
Have fun, eat a snack! You have your hands free now…
Boost Me (for free)
Boosting creators is what makes them go forward. Do you like what you see? Then consider giving it a boost. Thank you
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (95)