Pokemon Pikachu Refrigerator Magnet

The refrigerator magnet is approximately 10cm in height.

The height of the refrigerator sticker is about 10cm.

I have incorporated gaps between the parts during the design process, ensuring seamless assembly. However, you will need to have adhesive readily available.

When I designed, I reserved gaps between the parts, so assembly is easy, but I need to prepare glue.

The designated magnet installation area is 10.2mm, therefore, only magnets with a diameter of less than 10mm can be securely attached.

The magnet installation position I reserved is 10.2mm, so only magnets with a diameter of less than 10mm can be attached.

Multiple magnet installation locations have been provided to accommodate varying magnetic properties of refrigerator surfaces. Typically, a single 10mm magnet is sufficient.

I have reserved multiple magnet installation positions to accommodate different surface magnetic properties of the refrigerator. Normally, a 10mm magnet is sufficient.

For flat refrigerator surfaces, a 1mm thick magnet is suitable. However, for curved surfaces, it is recommended to utilize a 1.5mm magnet.

If the refrigerator surface is flat, a 1mm thick magnet can be used. If the refrigerator surface has an arc, it is recommended to use a 1.5mm magnet.

Employing a soft magnetic sticker with 3M backing adhesive, as depicted in the image below, will yield optimal results.

Buying a soft magnetic sticker with 3M backing adhesive like the one shown in the picture will have a better effect.

Your appreciation for this model is greatly valued. Please consider bestowing a complimentary like and save for future reference. Thank you for your support!

If you are satisfied with the model, please give a free like and collect, thank you very much!