Search models, users, collections, and posts
SeeStar S50 2 inch Filter Holder
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
31 min
1 plate
Open in Bambu Studio
Boost
49
124
22
5
594
280
Released
Description
2 inch filter holder for the ZWO SeeStar machine. This has a friction fit into the machine, and a threaded fit for the 2 inch filter. Allows you to use whatever 2 inch filter you want on your SeeStar machine.
Recommend printing in .08 layer height as the threads are very fine and need a small layer height to print properly.
Note: There are two profiles in this print. One has the Filter Holder using tabs for the friction fit, the other is a full circle of material being used for the friction fit.
Warning: Turn off out auto shutoff while using this, and do not shut down or park the head while this is in your machine. There is mot enough clearance to park the head while this it inserted in the machine. Use at own risk.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (22)