Search models, users, collections, and posts
Gandalf the White's Staff - Interlocking
Remixed by
IP Report
Print Profile(4)
0.2mm layer, 3 walls, 10% infill
Designer
12.2 h
7 plates
Downscaled to 90% for A1 Mini
Designer
10.8 h
7 plates
All On One Plate, .16 Layer Height
33.7 h
1 plate
0.12mm layer, 3 walls, 10% infill
38.2 h
6 plates
Open in Bambu Studio
Boost
2027
6026
311
264
3.4 k
2 k
Released
Description
A remix of Gandalf the White's Staff I found on here. I changed the middle segments so that they lock together with an insert that is printed separately. This allows it to be moved more easily than the original Staff because it can be largely disassembled again. Additionally, the inserts should make the connections stronger even if you decide to glue it together completely.
You still need to glue the top and bottom two parts together and then glue the insert that only has knobs on one half into the top and bottom. The 5 middle parts then slot together using the other insert.
Did not require supports for any parts
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (311)