Astrotec

cover

IMG_9651.jpg

IMG_9652.jpg

IMG_9653.jpg

Main Parts painted

plate_1.png

2024-07-02_6c219ff1da0e8.jpg

Schermafbeelding 2024-07-02 194933.png

<h3>Description</h3>Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul style="list-style-type:disc;"><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>rinted model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul style="list-style-type:disc;"><li>Main parts. 0.2mm layer height:<ul style="list-style-type:circle;"><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul style="list-style-type:disc;"><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.

0.2mm layer, 3 walls, 12% infill

Guide Rail

Leveling Knob 0.15mm By Object

plate_2.png

Leveling Knob 0.2mm

plate_3.png

Schermafbeelding 2024-12-13 123003.png

Schermafbeelding 2024-12-13 123114.png

These are the parts required for the battery adjustment. You can choose to print the nuts with a layer height of 0.2 mm or 0.16 mm. I personally recommend using 0.16 mm for better results.

Leveling parts 0.16mm layer, 2 walls, 20% infill

KG3Dee

AA Mechanical Battery Dispenser

<h3>Description</h3>!!! For assembly, go to the original maker, and you&#39;ll find the instructions there!!!Original BY <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@KG3Dee">KG3Dee</a>!!! Also, you need the file Levelingnods (V3 Levelling Parts, 0.16mm layer, 2 walls, 20% infill) !!!&nbsp;Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard-size AA batteries. (≤Ø14.5mm)</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Enjoyed this model? A boost would really support my work and future projects!</boostcontent></boostme>

ASIA

Print Profile(2)

Description

Description

Comment & Rating (5)

This remix is based on

License

Related Models