Wall Plug for Cable Clip nails/Tacks
Print Profile(1)
Description
Wall plug Clip plug for external walls. If your house mortar bends the small nails/pins on cable clips, just drill a 5mm hole in the mortar and tap one of these in.
I tried printing with and without brims, both worked but if many copies are going on the bed then maybe you need a brim.
Printed fine in PLA, there's no grooves on these but they should easily be enough to grip a panel pin type nail in the mortar as there is no massive load on these to secure a cable clip.
Use a 5mm masonry drill bit with a bit of tape at 20mm for a depth stop.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)