Dollhouse

Built a Dollhouse for my kids.
First large project I did with Cadquery, and first large project on my printer.
I went ambitious.

---

For more details and part specs go here:
https://miniforall.com/dollhouse.html

This is an open source project that you can customize:
https://github.com/medicationforall/dollhouse

You can support this project and other projects I'm working on at patreon:
https://www.patreon.com/miniforall

---

A Tudor style dollhouse.
The central idea is that it would be printed in roughly nine sections. With the floors and roof divided into three sections each.

I opted for the main rooms to be 175mm x 175mm x 175mm or roughly 7" x 7" x 7".
Which is about the limits of my print bed.

On average each part takes about 2 days to print.
I spent 3 weeks printings parts.

No Support materials were needed for any of the parts.
The part modularity was a plus, and allows the kids to re-organize the house into different shapes or multiple smaller houses.
If I were to do this again I would add a more robust mechanism for connecting parts together.