Miniature Display Tray

Designed a Miniature Display Tray with cutouts and magnets for the bases. Suitable for Displaying miniatures and transport.

Display Stand supports 10 models, 25mm bases with magnets.

In addition; there is an alternate model which supports 5 bases 40 mm

For more details about the model:
https://miniforall.com/minidisplaytray.html

This is an open source project that you can customize:

https://github.com/medicationforall/cqindustry

You can support this project and other projects I'm working on at patreon:
https://www.patreon.com/miniforall

---

01/05/25
* I added 3 blank templates which was requested
* Included are 25.2, 32.2 and 40.4 diameter template cutouts  with and without magnet cuts

* Allows you to make your own customized mini display trays if you have some modeling experience

---

* Parts 11 - 1 stand, 10 magnets (3mmx2mm)
* Length - 225mm
* Width - 75mm
* Height - 56mm
* Weight - 72grams
* Print Time - 10 hours 24 minutes
* Layer Height - 0.2mm
* Infill - 10%
* No Supports
* To print on a 200x200mm bed I turned the model diagonal.