TCG Deckbox - NGC Edition V2

NEW : inserts to store SD cards and game cartridges compatible with this design !

You can also check out my foldable Dice TowerBox made to fit inside my deckboxes !

A kick from 2004 to store your cards ! Again in a remodeled version !
Up to 130 double-sleeved cards (200 simple-sleeved or 400 sleeveless, 82×96×76mm). No problem to store Yu-Gi-Oh cards as well as Magic Lorcana, and Pokemon.
Clips and pressure fit enclosure, up to 8 5×3ømm magnets to secure a bit more. Alternative version with and without clips and/or magnets included in the profiles.

What's new in this V2 ? In short, fixes for 2 major flaws.

First, no more need for an AMS to print it in multiple color.
Second, the top part needs to be printed upward for visual consistency, but without the conical supports it takes too much time and material, so I've made a custom support to reduce time and material consumption. Can be removed tho.

Optionally, you can print a cover (included) to glue inside the top part to hide bridging (it won't interfere with whatever you store).

Be careful while loading the 3mf files. Be sure to transfer/keep the slicing settings when changing printer profile or material profile.

💾 List of parts 💾
- Top and bottom parts with clips and magnet holes

- Frontplate

- Controller port insert

- 3 back ports insert

- Handle

- Top disk (better with a glossy filament)

- Alternative version without magnet holes

- Alternative version without clips

- Alternative version without magnet holes and without clips

- Optional cover part to hide bridging inside top part
- Divider

💵 A word to pro-printer/seller 💵

Contact me to get right to sell this items or directly go to my Patreon.
Attribution is always mandatory. Just add my IG (@rubiksensei) and/or my cults3d or Makerworld page link at the end of the product page.

Approved seller

Pina3DPrints [USA]

Catch'em all - Collectables [EUR/DE]

📝 Updates 📝

2026-06-04

- Current print profiles updated to accomodate new machine (A2L)

- Print profile will now be made depending on the buildplate size instead of series

- Removed the experimental support and interface settings. Everything double checked.
 

2026-01-11

- Current print profiles updated to accomodate new machines (H2 series and P2S)

- Trying a new way to upload print profiles : one for each printer series, they should still be compatible with each other tho.

You can still open P1 profile on a H2 machine for example. (But not a H2 profile on A1mini)

- H2 serie profiles created to take advantage of the larger buildplate but no way to properly test it since I don't own one of those. Please be indulgent about this one and give me some feedback so I can rectify what's need to be.

2024-07-08
- Initial Makerworld upload