Belt Hooks/Holders

Update: New hook models and improved covertec wheel holders in three different thicknesses! The covertec holders are designed with very little tolerance, you will probably need to trim the edges a bit for a lighter fit. the tightness of the grip increases with the thickness of the holding plate.


Multiple simple holders that slide onto your belt to hold onto things! Two models are designed to hold covertec wheels for LGT and other lightsabers. It is designed to be a little bit tight for a good hold. One model has three simple hooks and one model is designed to take an 20mm O-Ring (e.g. this one) so you can attach a carabine or a leash or a rope. In the back is a 10mm hole to screw the O-Ring in place. All models are made to fit onto 38mm belts (e.g. this one). Make sure to check your printing orientation to ensure strong hooks!

For all of my models that include supports, I highly recommend a detailing / support removal tool like the one from anish or C59. Those make use of a replacement filament cutter and have proven themselves a very valuable tool for clean and easy support removal, especially for threads. 

Also, please keep in mind, that the quality of threads is highly dependent on the quality and dryness of your filament, the calibration of your printer and the print resolution. A thread printed with .2mm layer height will be way harder to thread nicely and will require more force, than a thread printed at .08mm or .12mm layer height. Also, the Arachne wall generator does contribute a lot to precise threads. If you need more part strength, increase the number of walls, make use of the alternate extra wall feature and DO NOT use PLA.

If you like my work and want to support me, please consider boosting or buying me a coffee :)