Print-in-Place Fidget Rocker Switch
Print Profile(5)
Description
Update 07/18/24 - After hearing the feedback from the community, I've added a new version of the model, it's a more clicky version. if you think the first version was not clicky enough, try this one!
10 grams of filament, 25 minutes to print, and no assembly! (Print-in-place).
After many hours of design and many versions, our new fidget rocker switch is out!
The fidget rocker switch will be printed face down on the build plate, using PLA.
I added a Single-color version and a multi-color version.
Print Settings
- Material: PLA
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2-3
- Infill: 15%
- Supports: None
After printing it is best to let the, fidget rocker switch, cool down a bit. so it will be much easier to "break" loose the rocker for the axil.
And you will be able to do it with just your hands, not tools or anything needed. (but you might need to use some force).
If you print one, please share your results with us! and happy printing!
Make sure to check our TikTok channel and the video we made for this print.
License
Comment & Rating (90)