Henlor

cover

IMG_20240713_174437143~2.jpg

IMG_20240713_174207552~2.jpg

IMG_20240713_174351280~2.jpg

plate_1.png

plate_2.png

plate_3.png

2024-07-15_78901e2962389.webp

A smooth build plate is required for this print.This model was design to be printed on a smooth plate.&nbsp;I used PLA Matte for this print.

Smooth build plate Required

IMG_20240901_200933271.jpg

A clean and smooth build plate highly recommended.The result of the gradient will largely depend on the type and color of the filament used.&nbsp;I'm using the same principle as HueForge to create the gradient. So the TD (transmission distance), or in other words how opaque or translucent the filament is with play a huge role in the final result.&nbsp;For this print, you need to use fairly translucent white and an opaque accent color.&nbsp;This is the filaments, I've used for this print.Bambu Lab PLA Basic Jade White TD &nbsp;: 5Bambu Lab PLA Matte Scarlet Red TD : 2&nbsp;You can find some filament TD values in this database:https://3dfilamentprofiles.com/

Light Trail 02

IMG_20240901_201023961-EDIT.jpg

A clean and smooth build plate highly recommended.The result of the gradient will largely depend on the type and color of the filament used.&nbsp;I'm using the same principle as HueForge to create the gradient. So the TD (transmission distance), or in other words how opaque or translucent the filament is with play a huge role in the final result.&nbsp;For this print, you need to use fairly translucent white and an opaque accent color.&nbsp;This is the filaments, I've used for this print.Bambu Lab PLA Basic Jade White TD &nbsp;: 5Bambu Lab PLA Matte Scarlet Red TD : 2&nbsp;You can find some filament TD values in this database:https://3dfilamentprofiles.com/&nbsp;&nbsp;<figure class="image"><img style="aspect-ratio:16/16;" src="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAQAAAAngNWGAAABDUlEQVR4AYXRgUZDYRjH4TegFTKgpEqiFJgoWAoMEQGBgBboChaaAKxLKAhAhQqAdAmpBIQolkCFqp2nITvNKXuA7+/Hhzey5OWjE4Nq3rzY1f9/NGHPB549492+8Ww060iCS2XdctZdI3GsECmb+HJoIX6x6EgDm+lURTH+YB7V9nAqE5WNme4YKuOiY6iMe6PaQxUUIuTbswgFVNJwA8sO3Bn6yR6bWZMSNtJwDtuWfHpQxaPx9C9zadil7jrCigbq6UXceNIVKTWUIqypm2ytJdTiNyNeXclF6GttOVfeDEc7qzjR23r3OMFqZKng1kw0mXGLrfibHTScOZWgGv9TdC6ROFeMTgwYiIxvJzMRWQbeGZUAAAAASUVORK5CYII=" alt="Community Verified icon" width="16" height="16"></figure> &nbsp;&nbsp;&nbsp;

Light Trail 01

DropPunk

LightCycleSplit01a.png

LightCycleSplit02a.png

LightCycleSplit03.png

Split main body into two sections to print easier (I personally could not print the main body as it was without a fail). 2 parts and a dowel will print. Just glue them together.&nbsp;

0.2mm layer, 2 walls, 9% infill

Gray

Color

Black

Light Trails

plate_4.png

Light Trail 2

plate_5.png

barowdwngs

IMG_2093.JPG

IMG_2127.JPG

IMG_2128.JPG

This has become my most printed model. Love it!<ol><li>I set Top Z Distance to 0.17 on the Cockpit (which was ‘game changing’ for my print success rate; especially for scaled down prints)</li><li>I found that if I flipped the wall element upside down I got a really good fit, so I remodeled the light wall to fit in that orientation; which I find works well and doesn&#39;t look TOO goofy when the kickstand is down.</li><li>I also created a groove in the back wheel where the wall can easily slip in to. When scaled properly the walls fit really snuggly.</li><li>This model profile is scaled at 65% the original, which has become my perfect size. I&#39;ve also adjusted the scale of a few elements that I was having issues with. Like the front wheel pin. So be aware.</li><li>And finally, I created a right angle wall for those that want another dynamic wall alternative.  Enjoy!</li></ol>

Cockpit set Top Z Distance 0.17 for less complications.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

TRON 1982 Light Cycle replica. Reversed engineered from pictures of the movie.&nbsp;Requires glue to assemble all the parts together.&nbsp;Dimensions ± 200mm in length.&nbsp;&nbsp;CHANGE LOG<ul><li>15 Jul 2024 - first release</li><li>9 Sep 2024 - added Light Trail print profiles</li></ul>&nbsp;&nbsp;

TRON Light Cycle 1982

ASIA

Print Profile(5)

Description

Comment & Rating (486)

License

Related Models