Arthalino Design

cover

IMG_2995.jpeg

IMG_2996.jpeg

IMG_2997.jpeg

IMG_2998.jpeg

IMG_2999.jpeg

IMG_3001.jpeg

IMG_3006.jpeg

plate_1.png

2024-07-15_05bc33c09ed44.jpeg

IMG_2994.jpeg

2024-07-15_dd16fa67b11c5

0.2mm layer, 2 walls, 15% infill

Matchete

Screenshot 2024-10-26 094044.jpg

WhatsApp Image 2024-10-26 at 09.36.16_b4386e28.jpg

Dinosaur T-REX Pencil Holder2.jpg

Dinosaur T-REX Pencil Holder1.jpg

Original supports fell down half way through the print. I modified the supports and it went smooth with a bit less filament.

0.2mm layer, 2 walls, 15% infill - optimal support

manu_larav

20250203_125005.jpg

<ol><li>Improved sturdiness with 1 more wall.</li><li>Reduced 5% of infill.</li><li>Reduced Supports.</li><li>Improved smoothness in the last layers</li></ol><ul><li>0.2 mm Layer</li><li>10% Gyroid infill</li><li>Tree Supports - Threshold angle: 20</li></ul>

0.2mm layer, 3 walls, 10% infill Gyroid

ostat

IMG_7404.JPEG

Standard dinosaur, with fuzzy skin enabled

Fuzzy Skin - 0.2mm layer, 2 walls, 15% infill

LA_Dinosaur_PenHolder_Original

Ambrosinus

PXL_20250813_120629948.MP.jpg

PXL_20250813_123141689.jpg

LA_Dino_PenHolder_v1.png

🦖 Optimized Print Profile for Speed &amp; EfficiencyThis custom print profile was carefully tuned to save both time and filament—without compromising on quality. The final model stands at 150mm tall, approximately 96% of the original size, making it a compact yet faithful rendition.Key specs:<ul><li>Layer height: 0.2mm</li><li>Walls: 2</li><li>Wall generator: Arachne</li><li>Infill: 15% gyroid</li><li>Print time: 4:05 hours (total 4:19 hours)</li></ul>✨ What makes this profile special:<ul><li>Mixed infill patterns for structural balance and material savings</li><li>Removed minor overhangs to streamline the print</li><li>Tree supports placed only on the build plate—a crucial tweak to avoid cracking issues caused by self-object supports (based on the first attempt experience)</li></ul>Note: This profile uses the original STL file, without the personalised name added to the dinosaur’s belly.

0.2mm layer, 2 walls, Arachne,15% infill, Gyroid, MPT h4:05

siannodel

IMG_8404.jpg

<ul><li>fuzzy skin painted on skin only</li></ul>

Fuzzy skin, Smooth teeth and spikes

westsunset

PXL_20250213_002527955.jpg

PXL_20250212_140715254.jpg

PXL_20250212_142351169.jpg

for .6mm nozzle.  Painted to look like Godzilla!   Just 3 hours with  .6mm nozzle and adjustments.

0.6mm nozzle, 0.3mm layer, 2 walls, 5% infill

SKYBORNE

20250422_211406.jpg

20250422_211420.jpg

20250422_211412.jpg

This profile is the same as the original, with added supports to keep the inside of the jaws from having floating regions and bad looking prints.

Generous Supports, 0.2mm layer, 2 walls, 15% infill

Dr0PeR

5962994322045520405.jpg

5962994322045520406.jpg

Coloreado en 3 colores (cuerpo, dientes y placas dorsales).3 paredes para que no se vea tanto la estructura interna del relleno.15% de relleno giroide para evitar que se vea un patrón a través de las paredes.

Colored in 3 colors (body, teeth, and dorsal plates)3 walls to better hide the internal infill structure15% gyroid infill to prevent a pattern from showing through the walls

Colored, 0.2mm layer, 3 walls, 15% infill

DuellM

IMG_6973(1).jpg

2024-08-02_153f350d8b5878

Colored Profile. The Teeth &amp; Back Spikes Have Been Colored So You Can Easily Paint Them To Whatever Colors You Want!! Enjoy!!!

Tobashadow

IMG_20260105_192747945_AE~2.jpg

0.2mm layer, 2 walls, 15% infill Modded Tree Supports

3D Prince

682840796_2078945876018741_4780451463fg968651921_n.jpg

690492844_1663055128158003_6687869543624050040_n.jpg

682840796_2078945876018741_4780451463968651921_n.jpg

Carefully Tuned for Support Release &amp; Time &amp; Material Waist &nbsp;many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below… Height range mods to control infill and vertical shell thickness and different top shell line widths.  supports painted, and support z distance set to 0.3mm&nbsp;0.28mm layer, 1 walls, 1mm wall width, 0% infill, wall generator classic, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%. note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different bambu printer.&nbsp;

Carefully Tuned for Support Release & Time & Material Waist 

Tripo.yt

20260209_194848.jpg

Dinosaur T-REX hoodie drawstring

raladic

Image_0003.jpg

Image_0002.jpg

Image_0004.jpg

Image_0008.jpg

Image_0006.jpg

Dino_sliced.png

I took a bit of extra time and made a handful of fine tuning adjustments to the print profile:<ul><li>Hand-painted fuzzy skin version, only painting the main body fuzzy, but leaving the arms, legs, mouth, eyes and spikes unpainted to keep them crisp. </li><li>Manually the seam along the back spine where it can be hidden along the spikes and with the fuzzy skin painting, they vanish almost completely.</li><li>Manually defined supports where needed from the inside. They are easy to remove using a pair of small needle nose pliers. </li><li>And last but not least, variable layer height along the very top, mouth area and top of the feet to give it a smooth finish.</li></ul>Print settings:<ul><li>Layer Height: 0.2mm layer (Variable Layer Height for some areas for smoother details)</li><li>Walls: 3 walls</li><li>Infill: 10% gyroid infill for strength</li><li>Top/Bottom layers: Concentric (improves following the curves of the part for smoother finish)</li><li>Fuzzy skin: Hand-painted for body, leaving details clear</li><li>Seam: Painted aligned on the back hidden along the spine of the spikes</li><li>Supports: Hand-painted where needed from the inside</li></ul>

Painted fuzzy skin, supports, Var. LH(0.2mm/3 wlls/10% fill)

Sabaat

IMG_0447.jpeg

IMG_0448.jpeg

<ul><li>Smooth grading - variable layer lines</li><li>Alternate two colors</li><li>No visible seams</li><li>Optimized supports for better reliability</li></ul>

Optimized, No Seams, 2 Color

Dino_bothSizesForScale_sliced.png

Dino_LittleOne_sliced.png

I took a bit of extra time and made a handful of fine tuning adjustments to the print profile:<ul style="list-style-type: disc"><li>Scaled down to 130mm height to make a little one that is still plenty big to hold some pens (see last image for scale)</li><li>Hand-painted fuzzy skin version, only painting the main body fuzzy, but leaving the arms, legs, mouth, eyes and spikes unpainted to keep them crisp. </li><li>Manually the seam along the back spine where it can be hidden along the spikes and with the fuzzy skin painting, they vanish almost completely.</li><li>Manually defined supports where needed from the inside. They are easy to remove using a pair of small needle nose pliers. </li><li>And last but not least, variable layer height along the very top, mouth area and top of the feet to give it a smooth finish.</li></ul>Print settings:<ul style="list-style-type: disc"><li>Layer Height: 0.2mm layer (Variable Layer Height for some areas for smoother details)</li><li>Walls: 3 walls</li><li>Infill: 10% gyroid infill for strength</li><li>Top/Bottom layers: Concentric (improves following the curves of the part for smoother finish)</li><li>Fuzzy skin: Hand-painted for body, leaving details clear</li><li>Seam: Painted aligned on the back hidden along the spine of the spikes</li><li>Supports: Hand-painted where needed from the inside</li></ul>

130mm - fuzzy skin, supports, Var. LH(0.2mm/3 wlls/10% fill)

kivtor

WhatsApp Image 2026-04-08 at 09.27.02.jpeg

WhatsApp Image 2026-04-08 at 09.27.02 (1).jpeg

Added AMS with 2 colors, same profile and settings than the original

Alex R

IMG_6516.jpeg

IMG_6514.jpeg

Der Support im T-Rex kann einfach mit einer Gabel und etwas Kraft entfernt werden.Viel Spaß beim Drucken!

The supports in the T-Rex can be easily removed with a fork and a little forceHappy printing!

Variable Layer Height, Support Filament, 2 walls, 15% infill

Jhabkin

IMG_2739.JPG

IMG_2740.JPG

IMG_2741.JPG

IMG_2743.JPG

IMG_2744.JPG

IMG_2745.JPG

IMG_2746.JPG

Profile is mostly the same as original one but I have reduced speeds and did a couple of small tweaks to make the print surface smooth with silk pla.

For silk PLA 0.2mm layer, 2 walls, 15% infill

RetroGear

pasted file.png

I had the same issue that others have reported - the internal support fell over half way through. Changed these settings for this profile:<ul><li>Support threshold angle: 50</li><li>On build plate only: On</li></ul>

KongenHakon

IMG_1438.jpg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

T-REX Dinosaur Pencil HolderSize : 16.5 x 16 x 13&nbsp;Recommended option : Activation of tree support

Dinosaur T-REX Pencil Holder

ASIA

Print Profile(21)

Description

Comment & Rating (4612)

License

Related Models