Zillolaab

cover

Zillolaab_Zippy_The_Bot.gif

Zillolaab_Zippy_MW_02.png

Zillolaab_Zippy_MW_03.png

Zillolaab_Zippy_MW_04.png

Zillolaab_Zippy_MW_05.png

Zillolaab_Zippy_MW_06.png

Zillolaab_Zippy_MW_07.png

Zillolaab_Zippy_MW_08.png

plate_1.png

20230909_013058.jpg

2024-07-15_cb003b8a8d939

<ul><li>0.2 layer height</li><li>No supports</li><li>Wall thickness 3</li><li>Infill 15%</li><li>Brim</li></ul>

1 color - 0.2mm, 3 walls, 15% infill

Zillolaab_Zippy_image06.png

<ul><li>0.2 layer height</li><li>No supports</li><li>Wall thickness 3</li><li>Infill 15%</li><li>No Brim</li></ul>

Big_version_0.2mm layer, 3 walls, 15% infill_NoBrim

2024-07-15_56c5adbb69e71

Zillolaab_Zippy_MakerWorld_01.png

<ul><li>Layer Height: 0.2 mm (or 0.12 mm for finer details)</li><li>Infill Density: 15% or higher</li><li>Print Speed: 50-60 mm/s</li><li>Extruder Temperature: 200-210°C (for PLA)</li><li>Bed Temperature: 60°C (for PLA)</li><li>Cooling: Enabled (100% fan speed after the first few layers)</li><li>Adhesion: Brim recommended to help with bed adhesion</li><li>Support: Print without supports</li><li>Material: Perfect in PLA</li></ul>

3 colors  - 0.2mm, 2 walls, 15% infill

Jaaaaaaaaaake

iShot_2024-07-23_12.32.41.png

iShot_2024-07-23_12.32.31.png

2024-07-23_f3ed057646ecb8

I have added a key hole on top of the head.50% size is perfect for a key chain.have fun printing it n share this excellent build with friendsCheers,Jake我在头顶上加了一个钥匙孔。50%的尺寸最适合做钥匙链。这个模型非常好玩，请和你的朋友们分享这个优秀的模型，爱你们的，杰克

I have added a key hole on top of the head.50% size is perfect for a key chain.have fun printing it and share this excellent build with friendsCheers,JakeI have added a key hole on top of the head.50% size is perfect for a key chain.This model is a lot of fun, please share this excellent build with your friends.Love you all,Jake

0.16mm layer, 3 walls, 15% infill 50% perfect for key chain

MillCasaMakes

zippy with hand brim1.jpg

2024-09-06_87e17c7d9cac9

zippy with hand brim2.jpg

Removing the brim from the entire model was a hassle, but printing without the brim would occasionally end with the hands flicking off. It's not the design's issue, the overhangs are curling up and catching the lip and popping the hand off. None of the other parts seem as susceptible to this. So I created this profile that adds a brim just on the hands. So far, so good.&nbsp;

0.2mm layer, 3 walls, 15% infill - brim around the hands

Tala16

IMG_1160.jpeg

2024-07-20_fbc4d48517e17

Project reduced to 70% Fill type changed.0.2mm layer, 3 walls, 15% infill

70% 0.2mm layer, 3 walls, 15% infill

plate_2.png

100%

plate_3.png

zackza

photo_2024-09-06_17-04-07.jpg

2024-09-06_7277008017447

_(1).2024-09-06_d23b94f6ab03

_(2).2024-09-06_8837cc50f6106

3 sizes&nbsp;Sliced for SILK PLA (I noticed all my silk prints weren't working so I made a silk pla profile with great results like in the photo (50% first plate)

SILK PLA, a1mini, 3 sizes, 0.16mm layer, 3 walls, 15% infill

Stella

PixPin_2024-12-17_22-19-58.png

IMG_20241217_221156_[B@6571b2.jpg

以钥匙扣版本为基础，给每个关节都添加了100%的填充，使得关节更牢固

Based on the keychain version, 100% infill has been added to each joint, making the joints more robust.

Reinforced Keychain Articulated Version

Smonstr Studio

IMG_9451.jpg

I have added 6 holes for magnets.&nbsp; But you can also use just 3 or 4 magnets

Zippy - Magnet-Version 6x3 - 75%

IMG_9453.jpg

I have added 6 holes for magnets.&nbsp; But you can also use just 3 or 4 magnets

Zippy - Magnet-Version 8x2 - 100%

blue pigeon

IMG20250710200350-2.jpg

PLA silk , 1 color , A1mini compatiable

130% scaled to fit 0.91 oled

Head back cover (tp4056 charging module)

melooon

a628e6d0-e3cb-11f0-9b71-57c30e2bde9f.gif

a6674f60-e3cb-11f0-9b71-57c30e2bde9f.jpg

a65cc810-e3cb-11f0-9b71-57c30e2bde9f.jpg

a666da30-e3cb-11f0-9b71-57c30e2bde9f.jpg

<ul><li>Print with support needed for the head cutout only</li><li>Scaled to 130% to fit 0.91 oled module in the head</li><li>The head cutout can only fit small lipo battery and small microcontroller IC (like attiny85)</li><li>Has a back cover with cutout to fit tp4056, and an opening for a switch</li><li>Added screw holes for the back cover</li></ul>

OLED eye version (130%, 0.2mm layer, 2 walls, 40% infill)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Enjoying this model? Give it a Boost!</boostcontent></boostme>&nbsp;Introducing &#34;Zippy&#34; the Bot! 🤖&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000542083/design/2025-11-25_041a436d5b13e8.png"></figure>&nbsp;Articulated print-in-place robot that requires absolutely no supports or assembly. Very easy to print, it delivers excellent results with PLA, and extremely fun to play with.&nbsp;Love Zippy? My Patrons also get the exclusive Mini-Zippy, a scaled-down, quick-print version perfect for gifts, keychain or fun.Check it out and join the community: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/ZilloLaab">https://www.patreon.com/ZilloLaab</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000542083/design/2026-01-07_baf41f3d0213b.gif"></figure>🛑 This model and the associated files are for PERSONAL USE ONLY.<ul style="list-style-type: disc"><li>FILE DISTRIBUTION IS STRICTLY FORBIDDEN. Do not share, remix, or redistribute the digital files in any capacity.</li><li>TO SELL PHYSICAL PRINTS: If you wish to sell physical prints of this model, you MUST join my Commercial License Tier on Patreon. Selling prints without a valid, active license is a violation of copyright.</li></ul>➡️ Get your Commercial License here: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/ZilloLaab">https://www.patreon.com/ZilloLaab</a>&nbsp;As always, fully designed by me, no AI involved. Happy clicking 💙&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000542083/design/2026-01-07_192a68f4eb1e.png"></figure>&nbsp;

Zippy the Bot 

ASIA

Print Profile(12)

Description

Comment & Rating (1723)

License

Related Models