Poop Chute + Buckets
Print Profile(1)
Description
I have designed a poop slide, which can be screwed directly to the printer. For this you need the same screws that are used for the spool holder. For the installation just look at the pictures to see which screws need to be removed and screw the poop slide to the printer with the screws of the spool holder.
Be careful which box you print, as there are two different sizes and two different designs. One version is for printers that still have the original feet installed. The other version is for printers that have the anti-vibration feet installed.
Printing settings:
Poop Slide:
-Layer height: 0,16mm (Because of the overhangs)
-Infill: 35%
-Print with supports
Boxes:
-Layer height: 0,28
For the rest you can use standart settings
I also created this one, which I think is the better version:
But decide for yourself.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)