Sunflower Fidget Buddy
Print Profile(1)
Bill of Materials
Description
The Sunflower Fidget Buddy is an easy to print fidget toy that comes with a body as a stand for the sunflower fidget toy. If you don't want the body you can only print the head and put it on the fridge or magnetic boards. This design also participates in the MakerWorld Sandbox Games design contest.
The print comes with two plates, one for the multicolor head with just 3 color swaps and the singlecolor body.
You need to glue the body together after your print is finished. You also need two 10x2mm magnets (10x3mm magnets work as well but stand out a bit). Glue one magnet in the body, one magnet in the hole of the sunflower fidget toy and your new buddy is finished.
Attention: I recommend downloading this project and manage your flushing volume as you prefer if you print the multicolor head. White needs a lot of flushing to keep it clear on the print. You can place as many sunflower fidgets as possible on the buildplate and placing additional “Filament purge” objects on the plate if possible to minimize waste.
This model is: PRINT IN PLACE - NO SUPPORTS
Testprints:
A1 Mini with a 0.4mm nozzle printed at 100% size (multicolor head and singlecolor body)
Filament used for the testprints:
Head Glitter
Bambu Lab PLA Sparkle Gold
Polymaker PolyTerra PLA Peanut
Bambu Lab PLA Matte Charcoal
Bambu Lab PLA Matte Ivory White
Head Basic
Recycling Fabrik rPLA kühlende Zitrone
Polymaker PolyTerra PLA Peanut
Bambu Lab PLA Matte Charcoal
Bambu Lab PLA Matte Ivory White
Body Glitter
Fillamentum PLA Glitter Jade
Body Basic
Bambu Lab PLA Basic Bambu Green
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission. Contact me via E-Mail if you are interested in selling 3D-printed Neopyx3D designs.
If you like my work you can buy me a coffee and support my work:
https://buymeacoffee.com/neopyx3d
Recommended Main Settings:
Layer height: 0.16
Infill: 15 % Gyroid
Top-Pattern Head: Hilbert-Curve
Supports: No Supports needed
Build Plate Adhesion Type: No Brim
Printing Temperature and Cooling: depends on filament
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)