Slide Door Handle and Lock

Handle and Lock for Sliding Door.

Components:

1. Outer Handle (Base + Cover Plate + Qty 4: 6Gx25mm Tapping Screw)
2. Inner Handle (Base + 3 Cover Plates + Qty 4: 6Gx25mm Tapping Screw)
3. Lock Base (Base + 3mm x 14mm Gauge Pins + Qty 3: M3 x Hex Nut)
4. Lock Base Cover (Base + Neodymium Magnet 5x1.5-2.0mm + Qty 4: M4x16mm Cap Head Screw)
5. Latch (Base + Lock and Open Indicators + Neodymium Magnet 5x1.5-2mm)

Print Notes: The lock base cover and latch contain magnets which require a pause operation. 4xPerimeter walls, 30% Infill.

Assembly Notes: Test fit everything using tape or blue tack. Adjust design as required using step files included. Lock Side: Install Nuts to Base Plate then attach to wall with tapping screws, add gauge pins, assemble latch, then add cover and secure with cap head screw. Handles: Once positioned attach using tapping screws and cover with plates (secure with temporary fixing such as double sided tape or blue tack.