Monstera Coaster (No AMS)

Monstera Leaf Coaster (No AMS required for two tone prints)

For 2 color prints insert a pause in the slicer at 2.20mm / Layer 11 (as shown in photo 3)

Dimensions: 100mm x 4.00mm
Approx Print time: 1h23m with preferred settings

Settings in the uploaded print profile are designed for top surface quality and overall durability, notable changes listed below.

Quality:
Layer Height: 0.2mm
Initial Layer Height: 0.2mm

Strength:
Top Surface Pattern: Monotonic Line
Top shell layers: 5
Bottom Shell Layers: 10
Sparse Infill Density: 99%
Sparse Infill Pattern: Aligned Rectilinear

Speed:
Outer Wall: 60 mm/s
Inner Wall: 150 mm/s
Sparse Infill: 150 mm/s
Internal Solid Infill: 150 mm/s
Top Surface: 50 mm/s
Gap Infill: 100 mm/s

Acceleration:
Normal Printing: 3000 mm/s
Outer Wall: 2000 mm/s
Top Surface: 500 mm/s 
 
Variable Layer Height Slider is used on top 0.80mm with quality emphasized over speed.