Dual-Purpose Laptop Stand

A foldable laptop stand. Two usage modes. It can be laid flat or placed upright.

When installing, first insert the cylinder into the support frame, then snap it into place. I have set positioning points for the corresponding locations of the frame and frame. Assemble it according to the positioning points, then tighten the bolts. Remember not to overtighten the bolts when tightening them. Just tighten them, don't overtighten them, or you'll break them. If you really do break it, use water pliers to clamp the middle of the broken section and unscrew it in the opposite direction. Don't use brute force. The bottom bolt is hidden in the bracket. Some machines may not be very tight due to printing accuracy issues. It's okay, it doesn't affect the use if it sticks out a little.