Search models, users, collections, and posts
RTX GPU Keycap for ANSI layout enter key
IP Report
Print Profile(2)
![[AMS] Ironing, 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USda75bab441dff4/103237210/instance/2024-07-25_3e1dac03db092.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[AMS] Ironing, 0.2mm layer, 2 walls, 10% infill
Designer
33 min
1 plate
![[NO AMS] Ironing, 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USda75bab441dff4/103238058/instance/2024-07-25_c9ad3b4ccf419.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[NO AMS] Ironing, 0.2mm layer, 2 walls, 10% infill
Designer
20 min
1 plate
Open in Bambu Studio
Boost
631
1135
137
55
1.8 k
1.2 k
Released
Description
Now you can use you enter key in 4K! I really wanted one of these keycaps, but every one I found was made for the shift key, which is a different size on my keyboard. So, I made my own for the enter key!
This should fit all cherry-style keycaps. It will only fit on an ANSI layout enter key.
So far it has been tested on a Keychron and a Royal Kludge keyboard, but should work with any mechanical board with the ANSI layout.
This print will only work with nozzles ≤ 0.4mm as there are small details that will be lost with anything higher.
If you create your own profile, make sure the wall generator is set to “archane”.
Boost Me (for free)
If you like my work and would like to support me, please consider leaving a boost :)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (137)