Geared Card Box

Hello,

I've worked long hours on the model, and I hope you'll like it.

Remember that printers have different tolerances; the main issue is the latch, which is adjusted to the parameters of my printer. However, if you find that one of the latch parts is too loose or won't connect after printing the model, I've prepared an alternative version with different sizes, which I hope will solve the problem.

When assembling the model, don't be afraid to use some force, but remember to prepare one side properly first before pressing in the opposite side. Otherwise, there's a high chance of breaking the parts.

First, fold the box, then open it and insert the folded interior, not the other way around!

Trim well brim around the lock! Otherwise, it will be too tight. I recommend using a knife.

I'm a beginner in 3D printing, so I'm happy to hear any suggestions for changes to the model and will try to implement them. Thank you to everyone who prints and reviews the model. It gives me a lot of motivation to continue working.

Have fun!

CHECK OUT MY OTHER MODELS! :)

1. https://makerworld.com/en/models/649862#profileId-576349
2. https://makerworld.com/en/models/504769#profileId-420419
3. https://makerworld.com/en/models/542032#profileId-459602
4. https://makerworld.com/en/models/586849#profileId-508119