Dragonfly - Free 3D Print Model

Search models, users, collections, and posts

Jack

Art>Sculptures

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm nozzle NewVersion

Designer

1 h

1 plate

4.9(94)

!0.2mm nozzle!

Designer

59 min

1 plate

4.9(9)

Open in Bambu Studio

Boost

1225

3108

126

2.8 k

1 k

Released

Description

Can clip on a stick or use with a magnet (∅5×2) or just insert 2× the dummy disc and put on a string or pin with needles.

If you want to print this with a 0.4 nozzle ↦ scale 200% (and check the sliced preview) !

Comment & Rating (126)

@iStewie

Boosted

with the .4 nozzle, up layer to .16... came out great at 100%

@user_3396197302

Is that all one color or am I seeing little bits of color in the wings? I can't tell if it's an artifact of the camera or something with whatever is below the dragonfly. obviously single color will be a quicker print and this and that but my daughter is a part-time artist and one of the things she sometimes draws or otherwise creates are dragonflies so I'm looking for something fun to make for her And these look pretty good. I think I have the smaller nozzle but I haven't tried to use it yet so just looking through the comments to see if this is a good For what it is that I want to print which I'm not sure what that is yet exactly 😁

@iStewie

Boosted

Replying to @user_3396197302 :

Hi, this is printed in single colors are the light effects from the build plate holographic imprint which refracts the light for the effect.

@Cadman1963

Boosted

Print Profile

0.2mm nozzle NewVersion

I made them at 200% using the 0.4mm nozzle at 0.16mm layer height and all three came out awesome. My wife bluetacked them to our kitchen wall and was super happy with them. Thank you for such a detailed model 🙂

@user_3396197302

I think this model calls for magnets or allows for magnets. I bought two random sizes of magnets. I think 6x3 and 8x2. I believe this description said 5x2 but if I go to 200% the holes at the original designer put in here for the magnets will then grow and I should be able to do a little work and get back to the proper size magnets for whichever one of mine I want to use. But yeah it printed very well looks like

@user_765697899

Print Profile

0.2mm nozzle NewVersion

😎 Cool! The details is awesome! Can you modify it where you print a second layer of wings that clip on top of the existing wings? Or can be glued? Thank you for sharing your work!

(Edited)

The profile uploader has replied

@UBaer

Just stop the print after the wings, cut the head and tail and put on top. Is this for some D∪∩∈ Ornithopter mod?

@user_765697899

Replying to @UBaer :

No, I just wanted it to be more dimensional. It's really nice!

@UBaer

Replying to @user_765697899 :

If used correctly the forewings should have an steeper angle than the hindwings - so you have this 3D - Odonata just have only 4 Wings not 8.

(Edited)

@user_3549229035

Boosted

.4 nozzle still butiful :)

@andrew.alawami

Did you scale this up? or left it the standard size?

@Teenis1981

Print Profile

0.2mm nozzle NewVersion

it printed so nicely.

(Edited)

The profile uploader has replied

@UBaer

I am using a release agent like Isopropanol (IPA) just a few drops around your print after printing and capillary forces help you to lift the print.

@Lady_Eek

Boosted

As I didn't print this with Bambu Studio, it doesn't count as printing. Printed at 300% with a .2 nozzle and was absolute perfection! 10 out of 5 stars and please take the boost instead of a viable rating. :(