ELEGOO OrangeStorm Giga Enclosure

A 100 mm corner riser will be placed on top of the printer to create more space to extruder. 

• The side panels are made from 16mm thick PC multiwall sheets.
• Inside the enclosure, there is 10 mm thick soundproofing mat. ( https://www.biltema.fi/en-fi/car---mc/car-accessories/sound-insulation/soundproofing-mat-1000-x-500-x-10-mm-2000058344 )
• The side panels are attached to the printer frame with M5 screws. 
• The doors are made of polycarbonate sheets, sized 5x500x1250 mm and 5x600x1250 mm. 
• The doors are hinged with a 32x1000 mm piano hinge. 
• 8 mm magnets are used in the upper and lower corners of the doors, as well as in the handle, to keep them closed. 
• The spool holder tube is a 1.2m long clothing rod with a diameter of 25mm. 

Feel free to modify the model as needed. I will also provide the model in STEP format. 

I will update the parts list later.