Search models, users, collections, and posts
hollow knight - hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.8 h
1 plate
Open in Bambu Studio
Boost
53
81
5
3
51
19
Released
Description
Project: hollow knight.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Grey Transmission Distance: 1
PLA White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #18 (1.52mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (5)