The Magnetic Door Fridge Magnet Fridge Magnet
Print Profile(1)
Bill of Materials
- 3x2mmRoundMagnets x 4: https://a.co/d/byXwHsb
Description
Boost Me (for free)
If you download, print, or collect this free model, I would really appreciate it if you take the time to click the like <3 button (or boost if you see fit) as I put a ton of time, experimentation, and filament into developing, testing, and posting these- and your support helps me continue to do so!
This realistic fridge magnet model has two opening doors with built-in shelves and securing magnet spots (fits a 3x2mm magnet), removable semi-translucent “glass” shelves and vegetable drawer, an ice bin, and a tiny light “bulb”- no, it is not a working one, I didn’t want to make this model too complicated.
The best part (in my opinion- though obviously I am a bit biased) is the fact that I designed the doors with internal slots for magnets (inserted during print pre-programmed print pauses) which means you can put tiny magnets on the fridge magnet that is on your magnetic fridge!
With Halloween coming up, I initially wanted to put a severed head inside the fridge, but then I saw someone else already did that- so I decided to just stick with more traditional stuffs. The pictured food items inside the fridge are just doll-house toys, and tons of inexpensive variations can be found with a simple search on Amazon.
SEE PRINT PROFILE FOR CRUCIALLY IMPORTANT PRINT AND MAGNET SIZE INFORMATION!
***PLEASE NOTE!! ***
Just a warning- this fridge magnet is 7 inches tall (just fits on my A1 Mini) and even with low infill it has a little bit of weight to it, especially if you choose to add internal door magnets- so you will just want to find some strong magnets to mount on the back to make sure this fridge stays safely secured to your fridge! I used two of the round 60x1.5mm sticker magnets from Bambu Labs’ MakerSupply- I sanded the bottom of the base a teeny bit because I printed it on a textured plate which can make it a little less receptive to good adhesion.
ASSEMBLY INFO:
For stability purposes, the hinges on the doors are designed to be a snug fit with the angled slots in the fridge base. You may need to sand the connectors a little bit to ensure they don’t break as you install them, make sure to be careful when pressing them into the base- try to apply firm steady pressure to the middle cylinder part of the hinge as you wiggle them a little from side to side- avoid putting too much pressure on the outside cylinder. Adding a little superglue is recommended but not required.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)