Sunflower Gnome Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x366.98mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ IIID Max Burnt Orange Transmission Distance: 3.6
PLA+ IIID Max Yellow Transmission Distance: 5
PLA+ IIID Max White Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Burnt Orange
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
If you like my models, consider donating here
https://www.buymeacoffee.com/ollie13
If you would like to sell my models, join the membership here
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)