Death Stranding Cliff Unger Mini-Poster Hueforge
Print Profile(1)
Description
Small and quick Hueforge printed at 0.16 layer height with a 0.16 layer height first layer, only 2 filament change. prints under 45 minutes.
Instructions to print:
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm
The Model is 103.94x220mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6 (or any black of similar Transmission)
PLA+ Elegoo White Transmission Distance: 8 (or any white of similar Transmission)
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.96mm) swap to White for the rest.
If you're not sure about how to print hueforge, follow the guide here: https://wiki.bambulab.com/en/filament-acc/filament/hueforge-printing-guide
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)