IONIC COLUMN TWIST-OFF PLANTER
Print Profile(2)
Description
Hello!
I’m introducing a project for a two-part plant pot cover. There are many similar projects available online, but I wanted to create my own. This led to the development of a rotating fastening system, and this is my first public project that uses it.
The cover consists of two parts:
220624-04-001-TRAY – a drip tray that protects your plants from overwatering,
220624-04-002-PLANTER – the main cover, inside of which the plant pot can be placed. The drainage holes in the cover allow for safe removal of excess water into the tray in case of overwatering.
The cover connects to the tray using an integrated “twist and click” mechanism. The tolerances are adjusted so that you can feel a satisfying resistance when turning the cover to release it.
The internal diameter of the cover is 130 mm, and the height is 90 mm. Scaling the elements may result in the clip not functioning properly!
If you like my project, be sure to check my profile - you will find a lot of useful models there!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)