Accessory for flex fabric (small version)

Note: download the stl file, I will update them when I have new version.

2024/10/2: connector2 had been updated to be stronger and can bend with larger angles.

This is an aggregation of accessory for 3D printed fabric.   You can see my fabric model in the following link:

https://makerworld.com/zh/models/550291#profileId-477241

https://makerworld.com/zh/models/580973#profileId-502396 

You can also download and print test fabrics that works with these inserts at https://makerworld.com/zh/models/582881#profileId-504011

On this page I put together all the connectors and inserts I have designed for 3D printed fabrics so you can download them for your make or remix.  I have test them with PLA basic layer height 0.2mm.

All the accessories on this page might get updated from time to time.  This make will be kept up-to-date.

Accessory list:

• Connector: this connector has a square face and could be used to connect two flex fabric together.  It is inserted at ‘outside’ of the fabric and could blend with other square pieces.  It is useful if you want to make a flex fabric pixel art.
• Connector2: this connector has a minimal round face and also specially design to have more flex.  It can be  used to connect two piece of flex fabric together and hide inside.  It is useful if you want to make a flex fabric with single color.
  • Note, you may want to experiment with different color and the seam line might look different (and might look good).
• Insert: single insert with square face, it is used for flex fabric pixel art.
• Loop2x2: a loop which can be used as a handle of the flex fabric art.

It is recommended to print them with 0.2mm layer hight.

Note: all these accessories are very small and could break into pieces when using large force.  Don't give them to kid.

If you like my ‘slot/insert’ system, boost me, upload profile, or leave a comment or suggestion or ideas.  Your like will be my drive.