Search models, users, collections, and posts
Dragon Ball Z - Goku Logo Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
5.8 h
1 plate
Open in Bambu Studio
Boost
169
343
52
29
163
96
Released
Description
Boost Me (for free)
Project: Goku logo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 193.01x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA Francofil Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #11 (0.96mm) swap to Orange
At layer #19 (1.6mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (52)