Search models, users, collections, and posts
Micro Shackle Hitch - Tiny Shackle
IP Report
Print Profile(4)
2" micro shackle
Designer
2.8 h
3 plates
1.25" micro shackle
Designer
2.1 h
3 plates
2.5" micro shackle
Designer
3.5 h
3 plates
two-color pin
Designer
50 min
1 plate
Open in Bambu Studio
Boost
76
167
11
13
274
159
Released
Description
A simple to print variation of the micro ball hitch models out there.
I recommend printing in ABS.
- Supports only needed on the shackle itself (build plate only)
- Inner+outer brim recommended if using ABS
- Print orientations should come in correctly if printing from the site, or the included 3mf files.
- Variable layer height is set on the main body just to speed up the print
- 0.16 layer height on the shackle is recommended for quality, rest at 0.2 is fine.
I've included a separate file for a two-color pin if needed. Of course if you have a metal one, go ahead and use that.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)