PCIE挡板6CM风扇支架 PCIE Slot Cover 60mm fan bracket - Free 3D Print Model

Search models, users, collections, and posts

vakahala

Tools>Other Tools

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

8.1 h

9 plates

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

PCIE slot cover three-slot 6cm fan bracket, can be used only with the first plate, or you can add a hood for 6010/6015/6020/6025 on the back. It is recommended to add the hood for increased strength. It can be used for both intake and exhaust, and it has a pre-drilled hole for cables. There are two cable exit hole positions based on the few 6cm fans I have, you can choose based on your fan. There are two thicknesses of intake air pads, 5mm/10mm, it is recommended to choose 10mm if you are using it for intake.

Fan hole Ø4.5mm, requires 4 outer diameter and 3 inner diameter, suitable for lock screws with the right length, screw thread m3, or you can use 3 outer diameter and 2 inner diameter.

Comment & Rating (0)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.