Search models, users, collections, and posts
Berserk - Guts Berserker Armor Hueforge
IP Report
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
Designer
4.2 h
1 plate
0.08mm layer, 2 walls, 100% infill
3.8 h
1 plate
Open in Bambu Studio
Boost
268
614
51
35
358
246
Released
Description
Boost Me (for free)
Project: Berserk 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175.09x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Elegoo Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Jade White
Border Only Colors from here until the end.
At layer #18 (1.52mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (51)