Cyberpunk 2077 (HueForge)
Print Profile(3)
Description
Project: Cyberpunk 2077.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.59x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Magenta Transmission Distance: 3.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Magenta
At layer #17 (1.44mm) swap to Ice Blue
At layer #23 (1.92mm) swap to Yellow for the rest.
Update 04.05.2026 a new print profile for 150x200
Update 04.05.2026 a new print profile for A1Mini Friendly
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
You can find the matching Hueforge frame here
https://makerworld.com/en/models/2306996-picture-frame-150x200mm#profileId-2556629
Boost Me (for free)
Do you like my model?
Then I would be incredibly grateful for your support in the form of a free Boost Token. And don't forget to follow me! Thank you so much! :)
License
Comment & Rating (10)