Cyberpunk 2077 Samurai (HueForge)

Project: Cyberpunk 2077 Samurai.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.3mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ice Blue
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to Ivory White for the rest.

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.