Funny Mini Gun Turret Prop Prank For Cars Trucks

***PLEASE CLEAN YOUR BED PROPERLY BEFORE PRINTING. DAWN DISH SOAP(Or Equivalent) AND HOT WATER THEN DRY WITH PAPER TOWEL OR AIR DRY!! NOTHING ELSE NEEDED!! THIS WILL ENSURE YOUR PRINT IS SUCCESSFUL***

##  These models printed as shown but if you dont clean your bed properly and have adhesion issues, then you can add a brim or mouse ears. I test all my prints and it is proven to print as I set it up. ##

Had some friends joking about a car mounted mini gun they saw, so decided to design my own simple version. Made with Tinkercad.

Made this one in Burnt Titanium PLA for looks and test print. Obviously you will want to print in a more heat resistant filament if you want to mount it to your vehicle.

My Settings: .24 layers, Arachne walls, 15% gyroid with infill combination(checked), Top/Bottom surface pattern = monotonic line

Supports: Tree(auto) > Default > On build plate only

Supports came off pretty easily and left minimal scarring with these settings.

Id recommend using some more durable settings if it will be out in the heat alot. ABS, ASA, PETG with maybe 7 walls or just print it solid if you have the time

This is just a toy or prop, use it wisely and with good judgement. I am not responsible for any trouble cause by this model.

**You can use some Trim adhesive or 3m Tape in most cases, to attach wherever you desire or use your crativity. I may design a few mounting options for screws if time permits, but this is just a work in progress for the time being. **