Stroller bottle holder - Valco, Noordi Fjordi
Print Profile(1)
Description
Bottle holder for our Noordi Fjordi 3 baby stroller.
Adapter for other brand Strollers like Valco Snap 4 etc.
For max 70mm wide bottle.
For the stroley adapter you will need 1x M5x25-30 and M5 nut.
Its possible to print it like on the project (I like it more for mor strenght). Make sure you have clean print plate with some 3Dlack etc, there is no big contact surface.
But You can print it on the bottom part like that.
Print it from UV stable material like PETG or ASA (ASA is more temperature stable and it will survive when you have Your stroller in the car during the sunny days)
And make sure you use at least 4 perimeters for the stroley mount.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)