Search models, users, collections, and posts
Naruto - Kakashi Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.5 h
1 plate
Open in Bambu Studio
Boost
302
644
66
47
443
251
Released
Description
Boost Me (for free)
Project: Kakashi.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 196.15x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Elegoo Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Jade White
At layer #13 (1.12mm) swap to Red
At layer #26 (2.16mm) swap to Jade White
Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (66)