Valeria Momo & Mattia

cover

S_misure.jpg

M_misure.jpg

L_misure.jpg

XL_misure.jpg

real_photo.png

plate_1.png

2024-08-22_9a06f31f51ed2

S Size (Ø 10cm max)

2024-08-22_a721d8aedb52a

M Size (Ø 16cm max)

2024-08-22_7f5b1ecd4d8bc

L Size (Ø 18cm max)

2024-08-22_4a5319182959f

XL Size (Ø 21cm max)

2024-08-25_d1256f8ae05a8

25cm x 25cm x 10cm high!

XL Size  (Ø 21cm max) - LOW VERSION (only 10cm high)

plstcprntr

IMG_2939.png

IMG_2938.png

IMG_2940.png

IMG_2941.png

IMG_2957.png

IMG_2958.png

IMG_2954.png

120x120x87mm with 98mm diameter holeFor ceramic cat bowl from Amazon (https://www.amazon.com/gp/product/B0CJTWKHV4)--no brim--tree support (easier to remove)&nbsp;

120x120x87mm with 98mm diameter hole for ceramic cat bowl

BarryL

IMG_6682.jpeg

This model is 140mm tall and 160x160 and was designed to hold bowls with a bowl opening of 116mm.Printed on a smooth PEI Plate and ironing on top surface to get the best look possible. Printed on a P1S using Bambu Labs PLA Matte and an AMS<ul><li>.16mm Layer height</li><li>3 wall loops</li><li>5 top, 4 bottom layers</li><li>10% infill</li><li>Outerwall speed of 100 (printing order of outer/inner)</li></ul> All of this and it still cut the print time from 21 hours down to just over 9!&nbsp;The goal was to get the best look possible in the shortest amount of time. I&#39;m still kind of new to this, so if you have any ideas on how to further improve this profile, I&#39;m all ears.

0.16mm layer, 3 walls, 10% infill

Kinda Alhamali

unnamed.jpg

I edited the already nice design to hold two bowls as I have two cats and thought one stand that can hold the two bowls is better than having two separate stands. You need to print both pieces then glue them together. I added connectors for the ease of attaching them. You also have to apply super glue before connecting the two pieces together. I made the hearts the same colour as the stand as I didn&#39;t want them, but the heart object itself is still under objects and can be coloured differently. I also did the same with the top and bottom lines on each piece of the stand which will become the middle section of the stand once connected and glued. &nbsp;Important note about the stand in the picture I uploaded: You might be able to notice a weird seam in the middle of my stand. This is due to an error my printer has been doing, which is freezing before the end of the print while displaying a message that says the print has been successful. I had to come up with a solution that worked for my unfinished stand but left an obvious seam. This will not happen with you as the error is not a design flaw. It&#39;s a 100% an issue I&#39;m having with my specific printer.

Two Bowl Stand - 19 x 38 x 10

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my models and want to support me, please consider donating a boost! I will be grateful. 🐶🐱🤗</boostcontent></boostme>Follow me on <a target="_blank" href="https://www.instagram.com/valeriamomo_mattia3d/" rel="nofollow noopener">Instagram</a>❤️ <a target="_blank" href="https://www.facebook.com/profile.php?id=61564640919476" rel="nofollow noopener">Facebook</a>❤️ <a target="_blank" href="https://www.tiktok.com/@valeriamomomattia" rel="nofollow noopener">TikTok</a>❤️ <a target="_blank" href="https://t.me/valeriamomo3D" rel="nofollow noopener">Telegram</a>❤️ <a target="_blank" href="https://www.patreon.com/ValeriaMomo" rel="nofollow noopener">Patreon</a>❤️ <a target="_blank" href="https://it.pinterest.com/valeriamomomattia3d/" rel="nofollow noopener">Pinterest</a>❤️. I am happy to present this set of 4 pet bowl holders! You can choose the one you like best, and you can also change the diameter Ø of the bowl hole.<h2>Remove the heart symbol ❤️</h2>If you wanna to remove the heart simbol (e.g. to save print time), simply use the same color of the base. You can also delete the heart and print a “negative” heart shape, like this one in the photo:<figure class="image image_resized" style="width: 61.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000600950/design/2024-08-22_dd5f6e746e772.png"></figure><h2>Change the hole diameter size Ø</h2>The bowl&#39;s hole is created using a cylinder negative modifier. Choose the desider size and delete all the others hole. If you wanna a custom size, simply edit the size of one of the cylinder using the Scale [S] tool in BambuStudio.<figure class="image image_resized" style="width: 66.88%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000600950/design/2024-08-22_604e639c360e6.png"></figure><h2>Commercial License 🤗⚡</h2>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>. 🐶🐱

Cat and Dog Food Bowl Raiser Stand

ASIA

Print Profile(8)

Description

Remove the heart symbol ❤️

Change the hole diameter size Ø

Commercial License 🤗⚡

Comment & Rating (258)

License

Related Models