PTFE tube remover for A1 printers series

Introduction

This accessory allows you to press the four clips that secure the PTFE tubes at the entrance of the extruder.

Bambu Lab provides a similar accessory, and there are also various other versions available, which are more or less similar and more or less sophisticated. This is my solution, which does not differ significantly from the original accessory designed for tube removal. However, I was inspired by the ring located higher up that keeps the tubes together. This design allows me to press all four elements simultaneously. In my case, when I need to use this accessory (something I do very rarely), it is always necessary to remove all four tubes, usually because I want to disconnect the AMS Lite.

In summary, this is an accessory worth having, as there will be a time when you will need it.

How to use

• Lower the extruder gently to the build plate, taking care not to cause any damage. If needed, place a cloth between the nozzle and the build plate for protection.
• Firmly press down on this tool with one hand while simultaneously pulling on each tube individually with the other hand; applying some pressure may be necessary.

Printing

Any material you choose, just remember to change it on the slicer.

This examples where made with Bambu Lab PLA

The all new UMSS

This makes part of the new UMSS project the is getting ready for final release. So there is a module that was specially made just for this tool. More information follow this link: UMSS - Bambu Lab A1 Tools and Accessories

Disclaimer

This project includes some modules that will be only available for members of printables.com "my club" or by purchase. Nevertheless most of them will be gives for free, the other parts is a way to support my work, surely you will understand if you value my work. Thank you for your support!

Support the designer:

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, that will be greatly appreciated.

Change Log

• (19-08-2024) - Initial release

Curious About My Tools? Check This Out!

For those of you who often ask about the tools I use to bring ideas to life, this article, The Journey From Idea To Object (Part I), offers some insights into the initial stages. It highlights the use of various tools, including software like Autodesk Fusion for CAD design, Blender for render and Bambu Studio for 3D printing preparation, and other... So, if you're curious about the software and hardware too, that I've incorporate in my workflow, take a look at the link for more details!" – Visit https://designrepcom.com/ for much more.