Search models, users, collections, and posts
Fire Emblem - Blue Lions Banner Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.9 h
1 plate
Open in Bambu Studio
Boost
22
51
1
2
24
8
Released
Description
Blue Lions banner from Fire Emblem Three Houses. Instructions below:
Project: Blue Lions.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.64x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Elegoo Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA Elegoo Beige Transmission Distance: 3.1
PLA Overture Yellow Transmission Distance: 15
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Blue
At layer #16 (1.36mm) swap to Beige
At layer #23 (1.92mm) swap to Yellow for the rest.
I hope you enjoy!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)