Black Myth Wukong Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA SILK Eryone Silver Transmission Distance: 3
PLA PolyLite Brown Transmission Distance: 0.8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Silver
At layer #12 (1.04mm) swap to Brown
At layer #16 (1.36mm) swap to Silver
One of the best characters in gaming this year and a popular character in Chinese novel Journey to the West
I would suggest to use a silk pla in Silver for this one
I am always excited to see what you think
This is another high quality thick print that does not feel like paper but uses less black
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)