Search models, users, collections, and posts
M6-M12 Standard Bolts and Nuts
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 98% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
67
158
34
8
1.3 k
612
Released
Description
Content has been automatically translated.
Hex bolts and nuts designed according to standards, with sizes M6×1.0×20, M8×1.0×20, M10×1.0×30, M12×1.5×30, tested with Bambu Lab A1 printing, with 100% infill. The nut and bolt combination will be slightly sticky at the printing seam, but can be eliminated by screwing in and out a few times, allowing for smooth use.
Note: It is not recommended for beginners to try printing bolts and nuts of M5 and below, as the print quality will not meet the requirements for bolt and nut mating. The uploaded physical photos are printed when testing the thread, the actual printing effect is consistent with the cover picture.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (34)