X1C/P1 Power Switch Cover V2
Print Profile(3)
Description
This is a cover for the power switch on the rear of the printer. It adds a small shield around the power switch to help prevent shut offs from unintentionally touching the switch. The back of the cover has two 1.05 mm deep square holes to press on two pieces of double sided tape (I used Scotch-Mount Double Sided Mounting Tape)
While installing, I recommend putting the power cable(not connected to a power source) through the cover and connecting it to printer to help with centering the placement of the cover.
Main changes from first version:
- Added hole at top so you can remove the screw holding the back panel.
- Removed unnecessary overhang from middle and increased the size of the inner rectangular hole
- Made the square holes at the back smaller.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (47)