Raspberry Pi 5 Raxda Sata NAS Cooler w/ Base Stand
Print Profile(1)
Description
Boost Me (for free)
If you enjoy my model please don't forget to boost me, It's highly appreciated!
There are some really awesome NAS projects out there but most of them were pretty complicated to print and the makers weren't interested in making a few tweaks in the interest of printability so I created this very simple but effective PiNas cooler.
The project is based around a Raspberry Pi 5 and The Raxda Penta Sata Hat.
I used a simple 40x20mm (40x10mm works just as well) USB fan for the cooler so no auxiliary power supply is needed.
I saw approximately a 15C/59F Degree reduction in temperature with the fan set to the lowest RPM setting. (before/after pictures attached above)
Raxda Penta Sata Hat for Raspberry Pi 5 - https://radxa.com/products/accessories/penta-sata-hat/
Some hardware is needed
8x - M3x8mm (mounting the fan mount to the drives)
4x - M3x16mm (for 40x10mm fan mounting)
4x - M3x25mm (for 40x20mm fan mounting)
12x - M3 Washers (not needed I just prefer the look)
4x - M2.5x14mm (for mounting base plate to Raspi)
4x - M3 Heat Press Inserts (for fan bracket) - https://a.co/d/fXYi6e3
M3 Hardware Variety Pack - https://a.co/d/09XHE1j
40x10mm Fan - https://a.co/d/eBussQ7
40x20mm Fan - https://a.co/d/daRODB2
If there are any updates or changes you think would be beneficial feel free to drop me a message or comment.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)