toppsi krett

cover

20240901_120013.jpg

X1 full plate - 48 pc

plate_1.png

single - test print

plate_2.png

X1 full plate - 48 pc - double thickness

plate_3.png

2024-09-01_645a134f3d267.jpg

20240901_115556.jpg

20240901_115759.jpg

Unbenannt_newplate.JPG

i do not recommend printing this profile with the app, but open it in studio and change the first layer line width to 1.2mmthis way it is more stable as you get one large first layer line instead of two narrow lines. uploading this profile failed, because the value was recognized as too large. But it sliced and worked fine for me. &nbsp;if you want to print without changing the first layer line width, please first make a test print with one connector.  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -***new file - added a plate with double thickness as reccomended by <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@user_2170557437">@user_2170557437</a>*** - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;you can choose between a plate with only one connector for a test print,&nbsp;or a full plate for X1/P1 with 48 connectors  (normal or extra plate for double thickness)&nbsp;i printed with PLA and in my opinion it ist good. but tpu might be even better

0.2mm layer, 1 walls, 15% infill / normal or double height

3dlyx

Rubber Replacement Connector Bridge

TobyStoe

Rubberband Game

i liked the <a target="_blank" href="https://makerworld.com/en/@3dlyx" rel="nofollow noopener">@3dlyx </a>&#39;s idea of replacing the rubberbands for this nice game with printed connectors<ul><li>original game: <a target="_blank" href="https://makerworld.com/en/models/478778#profileId-390049" rel="nofollow noopener">Rubberband Game by TobyStoe - MakerWorld</a></li><li>original rubberband replacement : <a target="_blank" href="https://makerworld.com/en/models/484592#profileId-396983" rel="nofollow noopener">https://makerworld.com/en/models/484592#profileId-396983</a></li></ul>But i found it a bit too inconvenient to place and remove the connectors. So i tried a simple version and it works fine for me.&nbsp;I recommend printing the first layer with 1,2mm line width so that you have one large first layer line and two smaller lines in second layer.This sliced in bambu studio and worked fine for me, but uploading the print profile failed because the 1,2 line is soo large.Soo please if you print with the app make a test print to see if it is stable enough. Thanks. &nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>if you like it and have a boost left, please boost me - thanks!</boostcontent></boostme>

Rubber replacement Rubberband game connector remix

ASIA

Print Profile(1)

Description

Comment & Rating (14)

This remix is based on

License

Related Models