Zabois29

cover

Screenshot 2024-09-02 191142.png

Screenshot 2024-09-02 191130.png

20240902_193910.jpg

20240902_193853.jpg

Fidget Spiral Cone

plate_1.png

2024-09-02_a24ad4e88302e.jpg

0.2mm layer, 2 walls, 15% infill

KingForg

20250515_202959[1].jpg

0% infill and works fine (printed twice)print by object and 2 colourGLIDES SUPER SMOOTHI printed the original design, and it wasn&#39;t as smooth as I wanted it to be, but the one I did before with my own settings worked better. So I chose this one.

SMOOTH 0.2mm layer, 2 walls, 0% infill

Color 1

Color 2

plate_2.png

Kreativling

photo_2025-09-11_17-17-32.jpg

you can start the job from your smartphone, 2 plates - each for one color,0,2 mm layer, 2 walls, 15 % infill

2 plates, each for 1 color, 0.2mm layer, no ams

3D Prince

629519172_1906565003323229_3088152964676787088_n.jpg

<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/%403D_Prince/upload?orderBy=downloadCount">Please check out my other cool models by clicking here !</a>

Time Optimized Filament Saver

SquidTech

Screenshot 2025-01-12 171450.png

0.28mm layer, 2 walls, 15% infill

T180

Gemini_Generated_Image_poy80upoy80upoy8.png

20251012_124340.jpg

Smooth layers & Lightweight

B3DN

Spiral Fidget Cone.jpg

Spiral Fidget Cone white background.jpg

preview-image.jpeg

carefully tuned saving material waste and time.many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below…&nbsp;0.28mm layer, 1 walls, 1mm wall width, 0% infill, wall generator classic, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%. note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different bambu printer.

Spiral Fidget Cone carefully tuned minimizing material waste

Thibo Design

PXL_20251210_153442345.jpg

Optimized for speed and quality

cool cat

IMG_0206.jpeg

Pepzixx3D

IMG_1738 (1).jpeg

Slay

IMG_4852.jpeg

20250410_195726_8640.jpeg

20250410_195420_4910.jpeg

Bi-color fidget.To avoid too much filament waste, print several of them at the same time (like 10 or so) and select one or two objects as flush object.

Bi-color spiral fidget cone

photo_2026-03-21_14-11-01.jpg

This XXL version is 13,5 cm (5,3 inch) high. My nephews asked for a XXL version, so if you also like it: Have fun with it 😊👍

XXL Version (13,5 cm/5,3 inch) - no AMS

Elmix

PXL_20250410_211133811.jpg

PXL_20250410_211139686.jpg

PXL_20250410_211205071.jpg

0.2mm layer, 2 walls, 0% infill

Außen

Innen

Beides (Ams)

plate_3.png

Solderchief

20260212_122550.jpg

20260212_122533.jpg

There is one Ams Version with both parts on the same Build Plate and a Version without Ams with Separatet Build Plates.

Dualcolour (Original Size)

Pillsbury

20251201_184020.jpg

Smoothest Layers and Elephant&#39;s Foot Compensation for the Best Possible Gilde.Gyroid Infill for Increased Strength With the Same Weight.

Smoothest Layers + Gyroid Infill

user_4061588644

20250519_113717.jpg

I had trouble getting the spiral to print without a brim, so I added one to this remix for better bed adhesion.

0.2mm layer, 2 walls, 15% infill W/Brim

7189891e-d066-4925-b35d-16f90dfd220d.jpg

634412093_1831462294183388_1367843569989607115_n.jpg

Time Optimized & Two Color

EOS 3d master

IMG_0834.jpeg

IMG_0833.jpeg

IMG_0832.jpeg

IMG_0831.jpeg

IMG_0830.jpeg

So fun loved playing with you need to print

Alex

PXL_20260502_173738989.jpg

PXL_20260502_173819027.jpg

Sequential, Bi-color, 0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

&nbsp;Thanks to all that have downloaded, liked, commented, or boosted my models you don&#39;t know how much I appreciate all of you and please feel free to continue to do so.&nbsp;&nbsp;I&#39;m working on more models for things like fidget toys that I should post in the summer or sooner so please keep up with my journey as I continue to make more models and grow on MakerWorld.&nbsp;If anyone is interested in having access to commercial use of my models I do have a membership here on MakerWorld that&#39;s available.<commercialme><commercialtitle>Membership</commercialtitle><commercialcontent>If you subscribe you&#39;ll have access to all my models and any future ones I make so please consider to subscribe</commercialcontent></commercialme>&nbsp;

Spiral fidget cone

marko 3D tlač

Snímka obrazovky 2024-12-29 203425.png

Snímka obrazovky 2024-12-29 203447.png

figet spiral 

ASIA

Print Profile(19)

Description

Comment & Rating (11252)

License

Remixes (1)
(Created before license restrict)

Related Models